Видео

Hi, roughly how many quarts did you end up putting in there? Thx

My buddy told not to trust the car manual on scheduled maintenance mileages because they want you breaking down. Book says 100,000 for trans fluid change on my 2016 flex, I got 58k and I need to change it quick. Thanks for the video.

Wow, this is life saving hack.i tried it and it works.t.y.

Waste of money I bought it thinking it was gonna kill mosquitos hasn’t got a single one and there was live fly

I have it can lift both sides of my SUV if i put in the middle. Very strong jack

My dude, you saved me from getting gross kiddie pool water/pee in my mouth. Many thanks!

Is it easy to put the panels on underneath?

Finding good protection against dirt on the front wheel is not a problem. The German SKS also produces an excellent option. Another thing is protection from dirt on the rear wheel. On Amazon, there is a lot of such protection. And it is basically massive, and should be effective. But, I'm talking about protection, like in this video. It is very similar to ProGuard Rear - Cable Tie. They even look like twins. But, only Mucky Utility MugGuard, for the front wheel, but there is an option for the rear: Mucky Nutz MugGuard Rear.

Put a ball valve after the pump before the coil to slow the flow and the water will get hotter coming out of the hose. Make sure the valve is before the coil. The other way around is bad news

What's the little button on top for ? By the handle? 🤔

You used your left hand to crank. Few people know that now.

Do I have to take off the hole chain from the back just to do the front sprocket or I just unscrew the front sprocket and put on the new one ?

Who says it holds that much fluid? The power torque filter box says it only takes 3.5 quarts and O’Reillys’s specs says 3.49 quarts for a fluid change.

thats not a high idle thats just what the car idles at ive had 3 s197s and theyve idled at 1k rpm

Just received mine today. Installation was easy and this video is great for those of us who can't be bothered to read instruction! lol

New sub earned 🎉

Is there an internal filter for the trans to change out or no? There’s gotta be a trans filter it’s automatic..🤔

Ugh Chrysler vehicles are nightmares, just get a Toyota

I got one but it won’t solar charge .. what am I doing wrong? Doesn’t it just sit in the light/sun?

Mine never worked properly the buttons very hard to push. There must be zero quality control.

any chance you can measure all the dimensions on that , I just made one but thinking I could get it working better if I made it the same as that one , im learning the hard way there is a little more science behind it than just slapping one together ,made a pool heater out of it , getting 110 on the output to pool

I’m seriously looking at AGM PVS 7 3AW1. Wonder about mounting system though

What change? The baffles are designed wrong, and the packing too tight.

I bought one of these a month ago and I'm out in the garage fixing to install it on my angle grinder, I took that blue plug out it fell apart and I'm thinking let me go see if there's a video on this and see what's going on so thank you. haven't put it on yet but it looks fine on your video from what I've watched so far

thank you :)

Thanks, I just soldered up the wires and plugged in my new Kenwood , and nothing but the display came on, short of time, I didn't go further, now I see how to get things going thanks to your video. I probably won't use all the features, but I did want a clock in my 91 F150!

Danke!

Garbage don't buy

this is exactly what i wanna do, like the slip on, but way too loud, my ears ring horribly. thanks for the awesome vid!!!

LEDs don’t go into reflector housings, they’re meant for projector headlights. You’re blinding all oncoming traffic with your lights.

I just bought one myself, today. didn't realize it was the loudest hedger I've ever owned my whole life!😮😮😮

I I'm not sure if my jeep is cvt or normal how can I tell. I gave the vehicle to my daughter and it is whining now. The owners manual doesn't say. I tried casting advanced with the Vin # they were no help.

Stick to riding

Howbdonyou detach the nozzle from the trigger I tried the half turn and oull but wont come out

How do you detach the nozzle from thr trigger

How do you detach the nozzle from the trigger

The finest shooting machine I have ever owned.

hey i have the exact same set up, i have 2 questions for you 😅 how long did you wait until you went all out with it, do i have to break it in? and also what settings are you using on your amp, im a newbie and would like to copy your amp settings, Thanks!!

what are the chargers called mine broke it would be really helpful if anyone can tell me or send me a link

Thank you for taking the time to make this video. I lost the manual & it's been a long time since I used this & forget how to pair it to my phone. Thanks to your video I have was able to pair it to my phone & listen to game 3 of Stanley Cup as I am pressure washing. Thanks again 👍👍🍻

Mine has been sitting disassembled on my basement floor for a month because I don't understand the instructions

I got two Pocket Vacs, which are similar aside from being an as seen on tv product. They work well, it’s just that the battery breaks if the vacuums are dropped on the floor from even just a couple feet up. I’m getting one of these since I’m hoping it will be a sturdier product that won’t break if I look at it funny.

Hi, did it come with remote controler? Thnks

Thank you so much for the instructions. Really helped me. I’m having an issue with the soap part. How does the soap come out of the machine. Mine is just spraying clear water?

Mercon LV Transmission Fluid: amzn.to/4bTsTH3 Oil Pan: amzn.to/3yTCUW6 Car Ramps: amzn.to/3XlDJBe Jack Stands: amzn.to/4b31bWS Headlamp: amzn.to/3KJzBTK Inexpensive funnel: amzn.to/3Ropx6m Funnel is optional. Links are affiliate, free for you to use but give me a tiny commission to help me make more videos for you! But here is how I did it in my 2014 Ford Flex Automatic transmission fluid change.

Can you explain WHY I need to replace the plugs and coils if I replace the pcm?

I hope by now you have invested in a welding table.

Awesome

Are they dangerous?

Thanks for the video. I accidentally threw away the manual and never knew how to calibrate it! Now I know, thanks!